Flash Led; Bluetooth - Sony Xperia TX LT29i Working Instructions

Tests: Service Tests

2.2.13 Flash LED

Check the Flash LED at the back side of phone to see
whether it‟s turned on.
Press the Back key to return to the Service Test Menu.

2.2.14 Bluetooth

During this test, the distance between the phone and
the target Bluetooth device must be 1.5 to 5 meters!
Make sure the target Bluetooth device is enabled and
visible always!
The Bluetooth test will be done in following sequences:
Step 1: Enable Bluetooth; wait 4-5 seconds, shows OK;
There is a permission request, select „Yes‟.
Step 2: Search;
Step 3: Show the Device Found list;
Step 4: Select the Target Bluetooth Device, and type the
PIN code to pair;
Step 5: Type the Pairing PIN code on the Target Bluetooth
Device also, when successful, it shows „Test
Complete‟.
Press the Back key to return to the Service Test Menu.
1266-5128 Rev 2

Sony Mobile Communications AB – Company Internal
Test Instructions (mech)
XPERIA
Sony Ericsson
SONY
Bluetooth
Enable Bluetooth OK
Searching
Device found
i
Bluetooth permission request
An app on your phone wants to
make your phone discoverable by
other Bluetooth devices for 300
seconds. Allow?
No Yes
XPERIA
Distance :
1.5 to 5 meters
Sony
SONY
Ericsson
Bluetooth
Enable Bluetooth OK
Searching
Devices found
Test Complete
XPERIA
Sony
SONY
Ericsson
Bluetooth
Enable Bluetooth OK
Searching
Devices found
Test Complete
XPERIA
11(25)