About Amd Athlon64 Socket Am2+ Cpu; Install Memory - AMD 780G User Manual

Based m/b for socket am2+ 64-bit quad core amd processor
Hide thumbs Also See for 780G:
Table of Contents

Advertisement

Front Side Bus Frequency - the working frequency of the motherboard, which is generated
by the clock generator for CPU, DRAM and PCI BUS.
CPU L2 Cache - the flash memory inside the CPU, normal it depend on CPU type.

2-3-2 About AMD Athlon64 Socket AM2+ CPU

This motherboard provides a surface mount, Zero Insertion Force (ZIF) socket, referred to as
the mPGA940 socket supports AMD Athlon64 processor in the package utilizes Flip-Chip Pin
Grid Array package technology.
The CPU that comes with the motherboard should have a cooling FAN attached to prevent
overheating. If this is not the case, then purchase a correct cooling FAN before you turn on
your system.
Be sure that there is sufficient air circulation across the processor's
WARNING!
heatsink and CPU cooling FAN is working correctly, otherwise it may
cause the processor and motherboard overheat and damage, you may install
an auxiliary cooling FAN, if necessary.
To install a CPU, first turn off your system and remove its cover. Locate the ZIF socket and
open it by first pulling the level sideways away from the socket then upward to a 90-degree
angle. Insert the CPU with the correct orientation as shown below. The notched corner
should point toward the end of the level. Because the CPU has a corner pin for two of the
four corners, the CPU will only fit in the orientation as shown.
When you put the CPU into the ZIF socket, No force required to insert of the CPU, and then
press the level to locate position slightly without any extra force.
2-4

Install Memory

This motherboard provides two 240-pin DDR2 DUAL INLINE MEMORY MODULES
(DIMM) socket for DDR2 memory expansion available from minimum memory volume of
128MB to maximum memory volume of 4 GB DDR SDRAM.
Valid Memory Configurations
Bank
Bank 0, 1 (DIMM1)
Bank 2, 3 (DIMM2)
Total
Colden Arrow
240-Pin DIMM
DDR2 667/DDR2 800/ DDR2 1066 *
DDR2 667/DDR2 800/ DDR2 1066*
System Memory (Max 4 GB)
CPU ZIF mPGAB Socket
PCS
9
Total Memory
X1
128MB∼2 GB
X1
128MB∼2 GB
2
128MB∼4 GB

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sb700

Table of Contents