Table of Contents
Advertisement
7 MAINTENANCE
7.1.
Maintenance Table
The following table lists the symptoms that may result when they need to be replaced, cleaned, or serviced
Item
Screen Board
Screen Frame (Reflection Tape) The inside of the Screen frame becomes dirty.
Note:
Before performing the maintenance, make sure to unplug the USB cable from the PC to turn off the
elite Panaboard.
7.2.
Cleaning the elite Panaboard
Gently, wipe off the elite Panaboard with a soft cloth that has been moistened with water and then thoroughly wrung out.
The surface of the Screen Board becomes dirty. Clean
Note:
1. The elite Panaboard is designed exclusively for projector images.
To remove marks written with a whiteboard marker or stubborn
stains, use a neutral household detergent diluted with water.
→
Only applied to the Screen Board's surface except for the Screen Frame
(Don't use a neutral household detergent diluted with water when wiping
off the Reflection Tape on the Screen Frame.)
2. Do not use thinner, benzene, or abrasive chemicals to clean.
(Doing so can result in discoloration.)
Symptom
30
Type of
Reference
Maintenance
See 7.2.
Clean
See 7.2.
Advertisement
Table of Contents
