Table of Contents
Advertisement
USB mode | System settings
f press the yellow
playback.
f press the blue
the next file.
Starting and controlling the slide
show
To start the slide show,
f press the green
photo list view.
To control the slide show,
f press the i button (11) while the slide
show is running in order to display the file
information.
f Then press
the 1 button (12) to activate/
f
deactivate shuffle playback.
the 2 button (12) to activate/
f
deactivate repeat playback.
the 3 button (12) (several times as
f
needed) to set how long each picture
should be displayed (standard: 3 sec.
/ +2 presses: 5 sec. / +4 presses: 7
sec.).
System settings
Opening the system settings menu
f Press the
button (16) .
f Use the
/
buttons (7) and P+ /
P– buttons (15) to select the system
settings
.
f Press the OK button (6) .
Robert Bosch GmbH
button (13) to stop
button (8) to switch to
button (10) in the
Setting the display duration for the
on-screen menu
Note:
The display duration that is set also
applies to the channel information
display.
To set the display duration for the on-screen
menu and the channel information,
f press the green
times as needed) to switch between the
following options:
f
: Standard display duration 5 sec.
: Display duration 7 sec.
f
+2
: Display duration 9 sec.
f
+4
f Press the
button (5) (several times as
needed) to return to the next higher menu
level or to exit the menu.
Restoring the factory default
settings
f Press the yellow
f Use the + / – buttons (7) and P+ /
P– buttons (15) to select the "Yes" option.
f Press the OK button (6) .
The device switches off automatically and
restores the factory default settings.
Checking the antenna reception
performance
f Press the
button (16) .
f Use the + / – buttons (7) and P+ /
P– buttons (15) to select the TV settings
.
f Press the OK button (6) .
7 620 320 035 | 11.2021
en | 13
button (10) (several
button (13) .
Advertisement
Table of Contents
