Table of Contents
Advertisement
16
en | Planning
4
Planning
4.1
Delivered with products
Make sure the following items are included with your products:
Quantity
1
1
1
1
1
1
1
1
1
1
1
1
1
4.2
System Prerequisites
Make sure:
–
–
–
–
–
–
–
–
Notice!
The requirements in the following tables must be observed to ensure for correct operation of
the Loudspeakers Line Isolator System and the connected public address/voice alarm system.
2014.03 | V1.1 |
Component
PM1‑LISM6 – Master Unit
Master Unit
Safety instructions
Notice with instructions for downloading manual
Mains power cord
Set of connectors
Set of 19" 2U mounting brackets
PM1‑LISS – Isolator Board
Isolator Board
Set of connectors
IP30‑rated housing
End‑of‑line resistor (47 kohm, 0.5 W)
Cable ties for strain relief
PM1-LISD – DC Blocking Board
DC Blocking Board
Set of connectors
You have downloaded the latest version of the documentation from the Bosch website:
www.boschsecurity.com
You have the manufacturer approved materials to install this equipment.
There is a mains power outlet of sufficient rating close to the intended location of the
product(s).
The installation is in a clean, dust-free environment.
The ventilation airflow of the 19" unit(s) is unobstructed.
The ambient temperature of the 19" unit(s) is within the operating range (-5 ºC to
+55 ºC).
There is sufficient free space and access at the rear of the 19" unit(s) for connectors and
wiring.
No liquid can spill into or on the products.
Installation and Operation Manual
Loudspeakers Line Isolator System
Bosch Security Systems B.V.
Advertisement
Table of Contents
