Backlight
In low-light conditions, press and hold t for 2 seconds to turn on the pager's
backlight. The backlight turns off automatically after the pager returns to the
Standby screen.
Setting up Your Pager
This section gives instructions for setting the time and date and Private Time. Access
to these features is obtained through the Setup Pager menu.
Setting the Time and Date
From the Standby screen, press
m
86
f hjl b e
Press and release
SET UP PAGER
displayed.
Press
m
81
f hjl b e
TIME/DATE
TIME/DATE
Press
m
85
f hjl b e
FORMAT!AM/PM
FORMAT! AM/PM
After the time has been set, the screen
m
85
f hjl b e
used to set the date is displayed.
DATE! 07/01
Press and release
m
85
f hjl b e
displayed, then press
DATE! 07/05
Press and release
displayed, the press
SET
m
85
f hjl b e
SET
t
twice.
r
until
is
SET UP PAGER
s
.
is displayed.
s
.
or
is displayed.
FORMAT!24HR
r
until the correct month is
s
.
r
until the correct day is
s
.
is displayed momentarily.
m
85
f hjl b e
TIME! 12!00A
m
85
f hjl b e
TIME! 03!00A
m
85
f hjl b e
TIME! 03!30P
46
45
To Turn Private Time On
You can set a time period during which your pager still receives messages
but it will not alert. Your pager goes into the Private Time mode daily until it is
turned off.
m
86
f hjl b e
SET UP PAGER
m
82
f hjl b e
PRIVATE TIME
m
82
f hjl b e
PRIVATE OFF
m
82
f kjl b e
PRIVATE ON
48
47
r
Press and release
until your choice of
(for AM/PM time), or
FORMAT!AM/PM
FORMAT!24HR
(for 24-hour time) is displayed, then press
The screen used to set the time is displayed
with the hour digit flashing.
r
Press
until the correct hour is displayed,
s
then press
.
Repeat Step 6 to set the minutes and AM/PM
fields (if AM/PM time was selected above).
t
From the Standby screen, press
twice.
r
Press and release
until
is
SET UP PAGER
displayed.
s
r
Press
, then press
.
PRIVATE TIME
is displayed.
s
Press
.
or
is displayed
PRIVATE OFF
PRIVATE ON
depending on the current setting.
r
Press and release
until
is
PRIVATE ON
s
displayed, then press
.
s
.