Table of Contents
Advertisement
Add or delete a Zone
It allows you manually add or delete a zone in the zone menu directly.
4.19.Scan
In the PC software – Public – Scan list, it allows to save 250 scan lists, and to program the
required scan lists and write it into radio.
Switch the radio to channel mode, as the scan list is only valid in the channel mode.
Scan On/Off
Allows turn on or turn off scan manually.
Scan List
It allows to create a new scan list or edit the existing scan list.
4.20.Roaming
Roaming enable users to search the roaming channel list by a programmed time interval and
lock on the repeater with the strongest signal. This function is only valid for digital channels.
4.20.1.One Time Roam
Allow you turn on the roaming manually. After the roaming is finished, it will return to the off
state. Manually Roaming is a onetime action only.
4.20.2.Roaming Zone
Select Roam Zone: select a Roaming Zone from the list to set it as active zone. You can also scroll
down the list of Zones and select Add Channel to add a new channel to the current Roaming Zone
and set the parameters.
Select Add Channel: Add a new roaming channel to the current zone.
New Roam Ch: Allows you modify the RX frequency/TX frequency/CC/ TS/CH name for the
roaming channel. Also allow you remove the roaming channel from the zone.
Edit Name: Edit the zone name.
Select Zone: Select the roaming zone for current channel.
Delete Zone: Delete the roaming zone from the current channel.
4.20.3.Auto Roaming settings
Set the fixed time waiting interval to begin automatic roaming when the repeater cannot be
found, roaming will begin at the end of this time.
On/Off: Turn on or turn off the auto roaming function.
Fixed Time Set: The roaming will be started at preset fixed time or set to off.
4.20.4.Start Roaming
Fixed Time: Starts timed roaming
Repeater check: The roaming will be started when the radio cannot find a repeater - "The repeater
is out of range" icon will appear, then the radio will perform roaming one time, and return to
roaming off automatically.
4.20.5.Repeater Check
On/Off: Turn on this function will allow the radio to check the repeater status.
Interval Set: When the repeater is out of range, the radio will try reconnect to the repeater, this
function allows to set the interval for reconnections.
4.20.6.OutRange Note
When the repeater is out of range after the repeater check, the radio will remind out of range.
Note kind: It allows to set beep or sound to remind out of range.
Note Times: It allows to set the "out of range" display times on screen.
4.20.7.Effect wait
During roaming, when the radio finds a repeater within range, it will stay at the repeater for a short
12
Hide quick links:
Advertisement
Table of Contents
