Playback Operations - Telefunken TF-FMT19BT Instruction Manual

.
Instruction manual
Operations
General operations
• Insert the plug of this unit into your
vehicle's cigarette lighter.
• Tune your radio to an unused
FM frequency, then match the same
frequency of this unit. Press CH+ button
on the RC to increase frequency by 0.1
MHz; or press and hold the Call button
on the unit and then rotate the knob
clockwise to increase frequency. Press
CH- button on the RC to decrease
frequency by 0.1 MHz; or press and
hold the Call button on the unit and then
rotate the knob anti-clockwise to
decrease frequency. Also you can press
number buttons on the RC to input the
needed frequency, then press CH+
button to confirm.
• To increase volume level, press
VOL+ button on the RC; or rotate the
control knob on the unit clockwise. To
decrease volume, press VOL- button
on the RC; or rotate the control knob
on the unit anti-clockwise.
• The frequency and volume
adjusted by you will be saved.
• To improve the display angle for
viewing it, you can rotate the cabinet of
this unit in one plane relative to the hinge
axis.
Press and hold the
the unit to see the voltage on the
vehicle's cigarette lighter.
4
5
connect digital players or another
external devices to the AUX input of this
unit. When using this function, press
button on the RC or Call button on the
unit to stop playback of USB or memory
card, and all functions will be controlled
by the external device.
PC with a special connecting USB cable
(not included). Insert a memory card into
the slot of this unit. The PC will recognize
this unit as an external disc and you can
browse the contents of the memory card
on your PC.
lighter socket, connect either of the
USB ports of this unit to your mobile
phone with a special connecting USB
cable (not included). This unit will serve
as mobile-phone charger.
containing MP3 files into USB port
or memory card slot of this unit
respectively. It will play and transmit the
button on
MP3 files automatically.
button to stop or continue playback. If
you switch off the unit during playback
and extract the USB/card, the unit will
memorize the last played track, and next
AUX line input
Use a 3.5mm minijack audio cable to
Card reader function
Connect the USB port of this unit to a
Mobile phone charger
When this unit is powered from car

Playback operations

• Insert a USB or microSD card
• Press button on the RC or Call