Table of Contents
Advertisement
Rotating the display
To rotate the display:
1. Extend the display vertically until the top of the stand riser.
2. Tilt the display back completely to avoid hitting the bottom edge of the display.
3. Rotate the display 90 degrees in clockwise or counterclockwise direction.
1
NOTE: To toggle the display setting on your Dell computer between
landscape and portrait when rotating the display, download and install the
latest graphics driver. To download, go to
https://www.dell.com/support/drivers
driver.
NOTE: When the display is in portrait mode, you may experience
performance degradation when using graphic-intensive applications such
as 3D gaming.
Configuring the display settings on your computer after rotation
After you have rotated the display, complete the procedure given below to configure
the display settings on your computer.
NOTE: If you are using the monitor with a non-Dell computer, go to the
graphics card manufacturer's website or your computer manufacturer
website for information on how to rotate the contents of your display.
To configure the display settings
1. Right-click on the Desktop and click Properties.
2. Select the Settings tab and click Advanced.
3. If you have an AMD graphics card, select the Rotation tab and set the preferred
rotation.
4. If you have an nVidia graphics card, click the nVidia tab, in the left-hand column
select NVRotate, and then select the preferred rotation.
5. If you have an Intel
Properties, select the Rotation tab, and then set the preferred rotation.
28
|
Setting up the monitor
90°
graphics card, select the Intel graphics tab, click Graphic
®
90°
and search for the appropriate
Advertisement
Table of Contents
