Panasonic SX-KN2600P Service Manual page 14

- Press the EXECUTE button to begin the test.
- The test result (OK or NG) is displayed within a few seconds. If the
test result is NG, not only the respective IC, but a break or short
circuit in the ADDRESS/DATA BUS as well as in any of the strobe
signal lines may be the causeofthefailure. (refer to
8.3. Other device test
- Press the EXECUTE button to begin the test.
- The test result (OK or NG) is displayed with in a few seconds. If the
test result is NG, not only the respective IC, but also a break or
short circuit in the ADDRESS/DATA BUS as well as in any of the
strobe signal lines may be thecauseof thefailure. (refer to
8.4. SD test
Fig.13
Fig.14
14
Fig.12 )
Fig.13 )