Honda Accord 2022 Owner's Manual page 89

Indicator Name
• After you have set the power mode
●
Malfunction
Indicator
●
Lamp
On/Blinking
to ON, the vehicle performs system
checks. However, if the readiness
codes have not been set by that
time, this indicator will blink five
times and then go off.
Comes on if there is a problem with
the emissions control systems.
Blinks when a misfire in the engine's
cylinders is detected.
Explanation
• Readiness codes are part of the on-board
diagnostics for the emissions control
systems.
2 Testing of Readiness Codes P. 639
2 If the Malfunction Indicator Lamp
Comes On or Blinks P. 614
uuIndicatorsu
Message
—
Continued 87