Kohler K-156 Installation And Care Manual page 4

Before You Begin (cont.)
This bath can be installed in either a new or existing installation. Follow the steps for your
installation.
This product includes a bath faucet, mixer valve, anti-scald valve, handshower, and drain which
must all be installed on-site.
The bath is designed for below-the-floor drain installation.
Unpack and inspect the bath for damage. Return the bath to the carton until installation.
Before installation, ensure proper access to the final plumbing connections.
Install the bath to an adequately supported, level subfloor.
This bath is designed for alcove installation.
Provide properly-dimensioned framing.
This bath conforms to CSA B45.5/IAPMO Z124, ASME A112.19.7/CSA B45.10, ASME A112.19.15,
and UL 1795. All dimensions are nominal.
1267113-2-C 4 Kohler Co.