Klipsch KL-7502-THX Specification Sheet

In-Ceiling Speaker
Our top-of-the-line in-ceiling LCR speaker,
the KL-7502-THX uses highly respected
certification, patented technology and
premium materials to deliver compelling
audio experiences that are second to none.
In fact, most in-ceiling speakers can't "fool"
listeners into believing the sound is coming
directly at them, rather than from above.
But that's not a problem for the KL-7502-
THX, as it offers articulate detail, powerful
impact and excellent localization.
The KL-7502-THX employs dual 5.25-inch
Cerametallic woofers that operate in an
enclosed tuned-port chamber. These ex-
clusive woofer cones offer superb damping
characteristics that will not flex or resonate
at frequencies within the drivers' operating
ranges, resulting in consistent bass response
regardless of the installation or ceiling air
space.
A 1-inch titanium tweeter in a patented
60-90-110-degree horn that features Vari-
able Coverage Technology, or VCT, allows
the speaker to create precise imaging and
localized sound fields.
Adding to its first-class sound, the KL-7502-
THX also has a premium look and feel with
its grille off, featuring a deluxe MDF baffle
with aluminum fascia. But when covered,
the speaker's paintable grille allows it to
blend in perfectly with any home décor.
All-new sure-grip mounting dogs offer even
pressure against drywall for long-term instal-
lation reliability.
Furthermore, the KL-7502-THX comes with
a lot of options. It is timbre matched to all of
our THX Ultra2-certified products, so you
can mix and match for the discreet stereo or
home theater system that's just right
for you.
KL-7502-THX
• Perfect for left, center or right channel use
• Makes a great back channel surround
• Brings superior sound to larger rooms
• Delivers a uniform coverage pattern
• Maximum installation reliability
• Mix and match with our other THX Ultra2 models
S p e c i f i c a t i o n S
Bandwidth
Sensitivity
Nominal Impedance
Cross Over Frequency
Power Handling
Enclosure Type
Drive Components
Weight
Height
Width
Depth
Cutout Height
Cutout Width
Material
Finish
All specifications are subject to change without notice. ©2008
45 Hz - 20 kHz ± 3dB
93 dB
4 Ohms
1200 Hz & 1800 Hz
100 Watts Cont. 400 Watts Peak
Bass Reflex via 1.6" diameter
port - Front Flush with Ceiling
Two and a half way system
utilizing a 1" Titanium tweeter in a
7.5 x 3.75" 60-90-110 VCT 45o
Skewed horn, and Two 5.25"
Cerametallic Woofers - VCT -
Variable Coverage Technology
12 lbs. / 5.4Kg
15.25 in / 38.7cm
0 in / 0.0cm
9.5 in / 24.1 cm
13.25 in / 33.7cm
13.25 in / 33.7cm
0.16 in / 4.0mm ABS
White - Paintable
www.klipsch.com
1-800-KLIPSCH