Disabling The Cameras; Installing Updates For The Home Connect Software; Resetting Home Connect Settings; Remote Diagnostics - Siemens KG N Series User Manual

Press .
3.
a The temperature display (refriger-
ator compartment) shows . The
cameras are activated.
10.4 Disabling the cameras
Press +
1.
a The temperature display (refriger-
ator compartment) shows
Press repeatedly until the tem-
2.
perature display (refrigerator com-
partment) shows and the temperat-
ure display (freezer compartment)
shows .
Press .
3.
a The temperature display (refriger-
ator compartment) shows . The
cameras are disabled.
10.5 Installing updates for the
Home Connect software
The appliance searches for updates
to the Home Connect software at reg-
ular intervals.
Note: If updates are available, the
temperature display (refrigerator
compartment) shows
To reset the update and the temper-
ature display (refrigerator compart-
ment) to the set temperature, press
any touch field.
Press +
1.
a The temperature display (refriger-
ator compartment) shows
Press repeatedly until the tem-
2.
perature display (refrigerator com-
partment) shows
perature display (freezer compart-
ment) shows
Press .
3.
a The temperature display (freezer
compartment) shows an animation.
a The update is installed.
at the same time.
.
.
at the same time.
.
and the tem-
.
a The control panel is locked during
the installation.
a If the installation is successful, the
temperature display (freezer com-
partment) shows
If the temperature indicator (freezer
4.
compartment) shows
ance was unable to install the up-
date.
Repeat the process at a later
‒
point.
If the update cannot be completed
5.
after several attempts, contact cus-
tomer service → Page 34 .
10.6 Resetting Home Connect
settings
If your appliance experiences con-
nection problems with the WLAN
home network (Wi-Fi) or your appli-
ance wants to log into a different
WLAN home network (Wi-Fi), you can
reset the Home Connect settings.
Press +
1.
a The temperature display (refriger-
ator compartment) shows
Press repeatedly until the tem-
2.
perature display (refrigerator com-
partment) shows
perature display (freezer compart-
ment) shows
Press .
3.
a The temperature display (freezer
compartment) shows an animation
for 15 seconds.
a The temperature display (freezer
compartment) shows
a The Home Connect settings have
been reset.
10.7 Remote diagnostics
Customer Service can use Remote
Diagnostics to access your appliance
if you contact them, have your appli-
ance connected to the Home Con-
Home Connect en
.
, the appli-
at the same time.
.
and the tem-
.
.
21