JVC AV-29L6SU Service Manual page 27

4.8.5 VSM PRESET SETTING
Measuring
Item
instrument
VSM PRESET Remote
control unit
VSM PRESET TABALE
Variable
Item
range
1.CONTRAST -16~+16
2.BRIGHT -16~+16
3.SHARP -16~+16
4.COLOUR -16~+16
5.HUE -16~+16
1.DRIVE R -64~+63
2.DRIVE G -64~+63
3.DRIVE B -64~+63
Test point Adjustment part
[5. VSM PRESET]
1. CONT
2. BRIGHT
3. SHARP
4. COLOUR
5. HUE
1. DRIVE R
2. DRIVE G
3. DRIVE B
PICTURE MODE
BRIGHT STANDARD
+16 +5
0 0
0 0
0 0
0 0
--- ---
--- ---
--- ---
Description
(1) Select 5. VSM PRESET from the SERVICE MODE.
(2) Set the PICTURE MODE to BRIGHT.
(3) Select < 1.CONT >.
(4) Set the initial setting value of PICTURE MODE, as
shown in the below table.
(5) Press the [OK] key to memorize the set value.
(6) Select < 2.BRIGHT > to < 5.HUE > in turn, and set
the values.
(7) Respectively select the "SOFT" and "STANDARD".
Make similar adjustment as same step as above.
(8) Press the [OK] key to set the COLOUR TEMP to
COOL.
(9) Select < 1.DRIVE R >.
(10) Set the initial setting value of COLOUR TEMP., as
shown in the below table.
(11) Press the [OK] key to memorize the set value.
(12) Select < 2.DRIVE G > and < 3.DRIVE B> in turn,
and set values.
(13) Respectively select the "WARM" and "NORMAL".
Make similar adjustment as same step as above.
Setting value
COLOUR TEMP.
SOFT COOL
-3 ---
0 ---
0 ---
0 ---
0 ---
--- -5
--- -5
--- 0
NORMAL WARM
--- ---
--- ---
--- ---
--- ---
--- ---
0 +6
0 0
0 0
(No.YA366)1-27