Kenwood KRF-V4080D Instruction Manual
  1. Manuals
  2. Brands
  3. Kenwood Manuals
  4. Stereo Receiver
  5. KRF-V4080D
  6. Instruction manual
Kenwood KRF-V4080D Instruction Manual

Kenwood KRF-V4080D Instruction Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

AUDIO VIDEO SURROUND RECEIVER
KRF-V4080D
KRF-V5580D
INSTRUCTION MANUAL
KENWOOD CORPORATION
This instruction manual is for some models. Model availability and features
(functions) may differ depending on the country and sales area.
About the supplied remote control
Compared to standard remote controls, the remote control supplied with this model has several operation
modes. These modes enable the remote control to control other audio/video components. In order to
effectively use the remote control it is important to read the operating instructions and obtain a proper
understanding of the remote control and how to switch its operation modes (etc.).
Using the remote control without completely understanding its design and how to switch the operation
modes may result in incorrect operations.
B60-5446-00 00
MA
(E)
0311
1
EN

Advertisement

Table of Contents
loading

Related Manuals for Kenwood KRF-V4080D

Summary of Contents for Kenwood KRF-V4080D

  • Page 1 AUDIO VIDEO SURROUND RECEIVER KRF-V4080D KRF-V5580D INSTRUCTION MANUAL KENWOOD CORPORATION This instruction manual is for some models. Model availability and features (functions) may differ depending on the country and sales area. About the supplied remote control Compared to standard remote controls, the remote control supplied with this model has several operation modes.

  • Page 2: Before Applying The Power

    Caution : Read this page carefully to ensure safe Before applying the power operation. How to use this manual Units are designed for operation as follows. U.S.A. and Canada ........... AC 120 V only This manual is divided into four sections, Preparations, Operations, Australia ............

  • Page 3: Table Of Contents

    Before applying the power Contents Caution : Read the pages marked carefully to ensure safe operation. Before applying the power ............2 Basic remote control operations for other components ............31 Remote Safety precautions ..............2 Control How to use this manual ............. 2 DVD player operation keys ......

  • Page 4: Unpacking

    If your unit was shipped to you directly, Operation notify your shipper immediately. Kenwood recommend that you retain the original carton and packing materials in case you needs to move or When the STANDBY indicator is lit, the power turns ON when you press ship the unit in the future.

  • Page 5: Special Features

    In addition to the basic opeations of this model, this IR remote control STEREO surround sound. supplied can also operate Kenwood cassette deck, MD recorder or CD player which are connected using the system control cords. This remote control can also control Kenwood DVD players directly without using the DVD players' remote control.

  • Page 6: Names And Functions Of Parts

    Names and functions of parts Main Unit Frequency display, Input display, AUTO DETECT indicator Preset channel display, Surround mode display DTS indicator 6CH INPUT indicator Speaker indicator MUTE indicator Band indicators DIGITAL indicator AUTO indicator CLIP indicator MEMO. indicator RDS indicators ST.

  • Page 7: Remote Control Unit (Rc-R0627) (Krf-V4080D)

    Names and functions of parts Remote control unit (RC-R0627) (KRF-V4080D) POWER POWER RECEIVER DOWN-PAGE-UP LOUDNESS TOP MENU MENU RETURN SETUP SOUND LISTEN MODE RDS DISPLAY P.CALL P.CALL MULTI CONTROL BAND ENTER TUNING A/B+100 AUTO BASS BOOST DISC SKIP DVD/6CH CD/DVD TUNER MD/TAPE PHONO...

  • Page 8: Remote Control Unit (Rc-R0628) (Krf-V5580D)

    Names and functions of parts Remote control unit (RC-R0628) (KRF-V5580D) POWER POWER RECEIVER DOWN-PAGE-UP LOUDNESS TOP MENU MENU RETURN SETUP SOUND LISTEN MODE RDS DISPLAY P.CALL P.CALL MULTI CONTROL BAND ENTER TUNING A/B+100 AUTO BASS BOOST DISC SKIP CD/DVD TUNER MD/TAPE DISC SEL.

  • Page 9: Setting Up The System

    Setting up the system Make connections as shown in the following pages. Input mode settings When connecting the related system components, be sure to refer to the instruction manuals supplied with the CD/DVD, VIDEO2 and DVD (KRF-V5580D only) or DVD/6CH (KRF- components you are connecting.

  • Page 10: Connecting Audio Components

    Setting up the system Connecting audio components SYSTEM CONTROL jacks To AC wall outlet AUDIO PHONO CD/DVD REC OUT PLAY IN REC OUT PLAY IN MD / TAPE VIDEO1 ¡ Video component Cassette deck or MD recorder CD or DVD player (For KRF-V5580D only) Moving coil (MC) cartridge...

  • Page 11: Connecting Video Components

    Setting up the system Connecting video components AUDIO VIDEO For KRF-V5580D MONITOR VIDEO 2 REC OUT PLAY IN PLAY IN VIDEO 1 VIDEO 2 VIDEO 1 VIDEO 1 VIDEO Monitor TV Video inputs (Yellow RCA pin cords) Video deck Video inputs and outputs Audio inputs (Yellow RCA pin cords) and outputs...

  • Page 12: Digital Connections

    Setting up the system Digital connections The digital in jacks can accept DTS, Dolby Digital, or PCM signals. Connect components capable of outputting DTS, Dolby Digital, or standard PCM (CD) format digital signals. If you have connected any digital components to this model, be sure to read the “Input mode settings” section carefully. COAXIAL OPTICAL VIDEO 2...

  • Page 13: Connecting A Dvd Player (6-Channel Input)

    Setting up the system Connecting a DVD player (6-channel input) (For KRF-V4080D only) If you have connected a DVD player to this model with digital connection, be sure to read the “Input mode settings” section carefully. DVD / 6CH INPUT COAXIAL OPTICAL VIDEO...

  • Page 14: Connecting The Speakers

    Setting up the system Connecting the speakers Front Speakers Right Left Center Speaker SURROUND FRONT CENTER GRAY BLUE SPEAKERS (6-16Ω) WHITE GREEN KRF-V4080D SPEAKERS (6 KRF-V5580D SURROUND WOOFER SUB WOOFER PRE OUT KRF-V4080D GRAY BLUE PURPLE SPEAKERS (6-16Ω) Powered Subwoofer Right Left Subwoofer...

  • Page 15: Connecting The Terminals

    Setting up the system Connecting the terminals Connecting the antennas AM loop antenna 1 Strip coating. 2 Push the lever. The supplied loop antenna is for use indoors. Place it as far as possible from this model, TV set, speaker cords and power cord, and adjust the direction for best reception.

  • Page 16: Connecting The System Control

    2. Do not connect system control cords to any components other than those specified by KENWOOD. It may cause a malfunction and damage your equipment. 3. Be sure the system control plugs are inserted all the way in to the...

  • Page 17: Preparing For Surround Sound

    If you have selected “LRG” as the Center speaker setting, system setting. 1 SURR NML (normal) : Average size Surround speakers are 1 FULL RANGE : For selected KENWOOD speaker – for connected to this model. 2 SURR LRG (large) example, KS-207HT, KS-207EX, KS-208HT.
  • Page 18 Preparing for surround sound If you have selected other than “LRG” as the Center speaker Input the distance to the speakers. setting, 1 SURR ON : Surround speaker setting mode to this model is 1 Select the DISTANCE from the set up displays and press the SETUP key again.

  • Page 19: Normal Playback

    Normal playback Preparing for playback Listening to a source component Some preparatory steps are needed before starting playback. VOLUME CONTROL SPEAKERS INPUT SELECTOR ON/OFF ON/STANDBY POWER AUTO INPUT SELECTOR ON/OFF Turning on this model Input 1 Turn on the power to the related components. Selector VOLUME 2 Turn on the power to this model by pressing POWER ON/OFF...

  • Page 20: Adjusting The Sound

    Normal playback Adjusting the sound Adjusting the LOUDNESS mode (remote control only) SPEAKERS ON/OFF VOLUME CONTROL You can adjust the Loudness function which controls the low volume settings to maintain the music’s richness. The adjustment can be made ACTIVE EQ when this model is in the PCM stereo and analog stereo mode.

  • Page 21: Recording

    Recording Recording audio (analog sources) 3 Press and hold the DIMMER key for more than 2 seconds to select the A-REC or M-REC mode during digital input. 1 Rec mode off : The digital input record mode is switched off. 2 A-REC mode : The digital input signals (DTS, Dolby Digital, or PCM) are identified automatically and converted into stereo signals that are ready...

  • Page 22: Listening To Radio Broadcasts

    Listening to radio broadcasts Using RDS This model can store up to 40 stations in the memory and recall them by (Radio Data System) one-touch operation. Radio stations can be classified into RDS (Radio Data System) stations RDS is a system that transmits useful information (in the form of digital and other stations.

  • Page 23: Presetting Radio Stations Manually

    Listening to radio broadcasts Presetting radio stations manually Enter the number of the preset station you want to receive (up to “40”). The RDS auto memory function assigns preset numbers to RDS stations starting from preset number “1”. Therefore, be sure to execute the RDS Press the numeric keys in the following order: auto memory function before using the following operations to manually For “15”, press ........

  • Page 24: Using The Rds Display Key

    Listening to radio broadcasts Using the RDS DISPLAY key Presetting RDS stations (RDS AUTO MEMORY) This function automatically stores up to 40 RDS stations in the preset memory. In order to use the PTY function, the RDS stations must be stored in the preset memory using the RDS AUTO MEMORY function.

  • Page 25: Tuning By Program Type (Pty Search)

    Listening to radio broadcasts Tuning by Program TYpe (PTY search) Press the PTY key to start searching. This function lets you set the tuner to automatically search for stations which are currently broadcasting the type of program (genre) you want EXAMPLE : Searching for a Rock Music broadcast.

  • Page 26: Ambience Effects

    Ambience effects This model is equipped with listening modes that allow you Dolby Digital to enjoy an enhanced sonic ambience with a variety of video sources. The Dolby Digital surround format lets you enjoy up to 5.1 channels In order to obtain the optimum effect from the surround of digital surround sound from Dolby Digital program sources (such modes, make sure to input the proper speaker settings as Laserdisc or DVD software marked...
  • Page 27 Ambience effects DTS mode DVD 6-channel mode ( For KRF-V4080D only) The DTS multi-channel audio format is available on CD, LD and DVD Using a DVD player or the like equipped with six (5.1) output channels software. DTS is a strictly digital format and cannot be decoded inside and this model, you can enjoy multi-channel encoded DVD source most CD, LD or DVD players.

  • Page 28: Surround Play

    Ambience effects Surround play When the DOLBY DIGITAL signal is input: The DTS compatible models can reproduce a CD, DVD, or LD carrying the DTS mark. (The DOLBY DIGITAL, PRO LOGIC, or STEREO indicator lights up.) DOLBY DIGITAL can be used when playing DVD or LD software bearing mark and DOLBY DIGITAL format digital broadcasts (etc.).

  • Page 29: Dvd 6-Channel Playback (For Krf-V4080D Only)

    Ambience effects DVD 6-channel playback Convenient functions ( For KRF-V4080D only) Using a DVD player or the like equipped with six (5.1) output channels and DIMMER SOUND this model, you can enjoy surround sound playback. Connecting a DVD player which can decode the surround signal itself is also acceptable.
  • Page 30 Ambience effects 2 Use the MULTI CONTROL knob or keys to select the ON or OFF Center Width mode (Pro Logic II Music mode only) setting. Center Width adjustment allows you to enjoy an enhanced sound when listening to music through center image from only center speaker, or left and right speakers or various combinations adjustments.

  • Page 31: Basic Remote Control Operations For Other Remote Components

    DVD player operation keys The remote control of this unit can control two groups of KENWOOD DVD players directly without using the remote control supplied with the DVD player. Group-1 : DV-4900, DV-4070B, DV-2070, DV-203, DVF-9010, DVF-K7010, DVF-5010, DVF-R9030, DVF-R7030, DVF-3530, DV-402, DV-5900, DV5700, DVF-R9050, DVF-J6050, DV-505, DV-503, DV-502, DVF-3550, DVF-3050, DVF-R4050, DVF-605, DV-6050, DVF-R5060, DVF-3060, DVF-3060K, DV-705, DVF-R5070, DVF-3070, DVF-3080, DVF-N7080 and DVF-8100.

  • Page 32: Cassette Deck, Cd Player & Md Recorder Operations

    Basic remote control operations for other components CASSETTE deck, CD player & MD recorder operations You can perform these basic operations using the keys described below when connected to KENWOOD cassette deck, MD recorder or CD player equipped with system control operations.

  • Page 33: Additional In Case Of Difficulty

    In case of difficulty Resetting the Microcomputer With the power cord plugged in, turn the POWER ON/ The microcomputer may malfunction (unit cannot be operated, OFF key OFF. Then, while holding down the ON/ or shows an erroneous display) if the power cord is unplugged STANDBY key, press POWER ON/OFF key.
  • Page 34 In case of difficulty Remote control unit Symptom Cause Remedy Remote control operation is not possible. • The remote control is set to a different • Press the source select keys or DVD POWER operation mode. keys to select the appropriate operation mode. •...

  • Page 35: Information Specifications

    Weight (Net) ..............7.8 kg (17.2 lb) Notes 1. KENWOOD follows a policy of continuous advancements in development. For this reason specifications may be changed without notice. 2. The full performance may not be exhibited in an extremely cold location (under a water-freezing temperature).
  • Page 36 For your records Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space provided below. Refer to the model and serial numbers whenever you call upon your dealer for information or service on this product.

This manual is also suitable for:

Krf-v5580d

Table of Contents