Advertisement
Step 3.
The top rail has a center piece
with two tubes hidden under the
fabric. The button on the bottom
of the center piece releases the
two tubes when it is pushed up.
Center
piece
Tube
Push UP button
under fabric
To fold the top rail:
!
Lift up slightly on the top rail.
!
Push up on the button located under the symbol
!
to release the two tubes.
!
Push down.
HINTS:
!
If top rails do not unlatch,
!
lift the center of the floor
!
higher.
!
Both tubes must be
!
released for the top rail
!
to fold.
Step 4.
Pull center up all the way.
Step 5.
Gather your unit together.
Do not force.
If unit will not fold, look for
a partially latched top rail.
Squeeze the latch button to
release the rail.
7
Step 6.
Find the bottom corner belt
loop (only one). This loop is for
holding unit and mattress
together while carrying.
Step 7.
Wrap the mattress around
your unit. Fasten together
the
straps, attaching
®
VELCRO
the bottom strap to the bottom
corner belt loop.
To Cover Your Pack ’N Play
Step 1.
Pull cover over your unit.
Be sure the carrying handle
attached to the mattress is
exposed.
Step 2.
On models with wheels, push
the plastic end of bag over the
wheels and feet of the unit.
Step 3.
Zip together.
The cargo bag (on certain
models) opens on either end.
Slip the bag over the Pack ’N
Play. Check that the carrying
handle attached to the mat-
tress sticks out the hole in the
bag. Zip both ends.
®
Wheel
Foot
Handle
8
Advertisement
