Table of Contents
Advertisement
9.6
Mounting the side panels
Have the following parts to hand:
Side panels
1.
Place a side panel on one long side of the base plate.
The black panel supports must face outwards.
2.
Insert the panel's two guide pins into the base plate's locator holes.
3.
Insert the supplied 6 mm Allen key into the opening at the top of the panel support.
To prevent damaging the thread, first turn the inserted Allen key half a turn anti-clockwise.
The screw will then „drop" into the thread. Tighten the panel's screws clockwise to a tightening
torque of approx. 3 Nm (hand-tight).
4.
Simply repeat steps 1–4 to fit the second side panel.
6 mm Allen key
17
Advertisement
Table of Contents
