What To Do When These Messages Are Displayed - JVC 1108TTH-AO-AO Instructions Manual

Troubleshooting
5
What to Do When these Messages
Are Displayed
Message
COMP.
No Input
COMP.
Lamp replacement
6
No device is connected to the input terminal.
The input terminal is connected but there is no signal.
Input the video signals.
A video signal that cannot be used in this unit has been input.
Input video signals that can be used.
* The names of input terminals such as COMP. will be displayed in yellow.
This message is displayed when the accumulated lamp time has
exceeded 1900 hours.
To clear the message, press the [Back] button.
Get ready a new lamp unit and replace as soon as possible. Reset the
Back
lamp time after replacing the lamp. (
BACK
Cause (Details)
P48 to 50)