Installation; Safety Information - Honeywell Sensepoint XCL Installation Manual

2.1 Safety Information

Observe these precautions:
Sensepoint XCL is suitable for ordinary locations only and must not be
installed in hazardous locations. Installation must be in accordance
with the recognized standards of the appropriate authority in the
country concerned. For Europe, see EN60079-14, EN60079-29-2, and
EN61241-14. For installations in North America, the National Electrical
Code (NFPA 70) should be strictly observed. All the appropriate local
and national regulations should be observed.
All manuals and user guides at all-guides.com
CAUTION
Failure to observe the precautions described in this section can
cause injury to persons or damage to property.
To minimize the risk of electrostatic charge, provision shall be made
for adequate grounding and equipment shall be installed in such a
manner so that accidental discharge shall not occur.
When Sensepoint XCL reaches the end of its life, it should be
disposed of in accordance with local regulations.
Do not use cleaning solvents or abrasives to clean the gas detector.
Do not attempt to modify the product in any way from the
manufacturers design or specification. Warranty will be void and
malfunction of the gas detector may result.
Use only genuine spare parts and accessories with Sensepoint XCL.
Malfunction may result if non-standard parts are used.
Chapter

Installation

2
13