Table of Contents
Advertisement
Washing machine description
Control panel
GB
Detergent dispenser: to add detergent and fabric
softener.
LEDS: to find out which wash cycle phase is under way.
If the Delay Timer function has been set, the time left until
the programme starts will be indicated.
SPIN SPEED knob: to set the spin speed or exclude the
spin cycle completely.
FUNCTION buttons: to select the functions available.
The button corresponding to the function selected will
remain on.
TEMPERATURE knob: to set the temperature or the
cold wash cycle.
START/RESET button: to start the programmes or
cancel any incorrect settings.
ON-OFF/DOOR LOCK Led: to find out whether the
washing machine is on and if the appliance door can be
opened.
ON/OFF button: to turn the washing machine on and off.
10
Detergent dispenser
FUNCTION
Buttons
Leds
SPIN SPEED
Knob
TEMPERATURE
Knob
PROGRAMME knob: to select the wash programmes.
The knob stays still during the cycle.
Standby mode
This washing machine, in compliance with new energy
saving regulations, is fitted with an automatic standby
system which is enabled after about 30 minutes if no acti-
vity is detected. Press the ON-OFF button briefly and wait
for the machine to start up again.
ON-OFF/DOOR
LOCK
Led
ON-OFF
Button
PROGRAMME
Knob
START/RESET
Button
Advertisement
Table of Contents
