JVC GM X50U Instructions Manual page 72

• Using the Power On/Off Timer
Select the item you want to set in step 3 in "Setting the
Clock" (page 26) and follow the instructions below.
POWER-ON SET
You can activate/deactivate the Power-On Timer.
Press 2/3 to select "ON" or "OFF."
ON: The Monitor automatically turns on at the time
set in "POWER-ON TIME."
OFF: The Power-On Timer is deactivated.
POWER-ON TIME
You can adjust the time to turn on the Monitor.
Set the hour and minute following steps 4 to 6 in "Setting
the Clock" (page 26).
POWER-OFF SET
You can activate/deactivate the Power-Off Timer.
Press 2/3 to select "ON" or "OFF."
ON: The Monitor automatically turns off at the time
set in "POWER-OFF TIME."
OFF: The Power-Off Timer is deactivated.
POWER-OFF TIME
You can adjust the time to turn off the Monitor.
Set the hour and minute following steps 4 to 6 in "Setting
the Clock" (page 26).
To reset the timer setting
After step 2 on page 26, proceed as follows:
1 Press 5/∞ to move the cursor (3) to "reset."
2 Press 3.
The confirmation screen appears.
r e s e t
A r e y o u s u r e ?
" Y E S " t h e n
" N O " t h e n
M E N U
3 Press 3 again to reset the setting.
To cancel the reset, press MENU/EXIT (or MENU on the
Monitor).
k e y .
k e y .
About the Timer Battery
The timer clock works on the battery embedded in the
Monitor.
If the battery becomes weak or has already run out, a message
appears on the TIMER, COLOR-REVERSE, and REFRESH
menus.
When the battery becomes weak (BATTERY LOW)
"BATTERY LOW" appears on the screen.
P R E S E N T T I M E
P O W E R - O N S E T
P O W E R - O N T I M E
P O W E R - O F F S E T
P O W E R - O F F T I M E
r e s e t
A D J U S T :
When the battery has run out (BATTERY EMPTY)
"BATTERY EMPTY" appears on the screen.
P R E S E N T T I M E
P O W E R - O N S E T
P O W E R - O N T I M E
P O W E R - O F F S E T
P O W E R - O F F T I M E
r e s e t
A D J U S T :
The clock is reset and "PRESENT TIME" is shown as "-- : --."
• You cannot replace the battery yourself. Please consult your
dealer to replace it.
• Set the clock and the timer functions (Power On/Off Timer,
Color-Reverse On/Off Timer, and Refresh On/Off Timer)
again after replacing the battery.
• You can use functions other than the timer functions
without replacing the battery.
T I M E R
: 1 4 : 2 5
: O N
: 0 8 : 2 6
: O N
: 2 1 : 2 0
B A T T E R Y L O W
S E L E C T : E X I T :
M E N U
T I M E R
: – – : – –
: O F F
: – – : – –
: O F F
: – – : – –
B A T T E R Y E M P T Y
S E L E C T : E X I T :
M E N U
27