JVC AV-29LS24, AV-29LX14, AV-29VS24, AV-29VX54, AV-29VX74, AV-29WX14, AV-29WX24, AV-25LS24, AV-25LX14, AV-25VX54, AV-25VX74, AV-21CS Instructions Manual page 18

Customized setting (continued)
AUTO SHUTOFF
You can set the TV to turn off automatically when no signal is
received for about 15 minutes or longer after the end of a
broadcast.
Select AUTO SHUTOFF in INSTALL menu, then choose ON or
OFF.
❇
MENU INSTALL menu
The AUTO SHUTOFF function does not turn off the TV's main
power.
The AUTO SHUTOFF function is not available in video mode.
VIDEO-2 SETTING
You can set the VIDEO-2 SETTING according to the video signal
output from the external devices connected to the VIDEO-2
terminal.
Select the VIDEO-2 SETTING in INSTALL menu, then choose a
setting.
❇
MENU INSTALL menu
VIDEO If a normal video signal (composite video signal) is
input.
COMPONENT If a component video signal (Y/C
For connecting methods, see "Additional Preparation" on page 22.
18
AUTO SHUTOFF
VIDEO-2 SETTING
/C ) is input.
B R
EXT. INPUT (TV/VIDEO)
You can select TV or video terminal input with one touch.
Press the TV/VIDEO button to select an input.
To operate this function with a menu:
❇
MENU INPUT menu
DISPLAY
You can display the programme number, video terminal number
and PR list on the screen.
Press the DISPLAY button to select the desired mode:
ON OFF
Choose a TV channel or a VIDEO terminal.
1
Press the DISPLAY button to display the PR LIST.
2
Select a programme number or video terminal by pressing the
5/∞ button to move up/down on the programme number or
press the 2/3 button to skip for each 7 programme numbers,
then press MENU/OK button.
To operate this function with a menu:
❇
INPUT menu
MENU
❇ About the basic operations of the menu, please see the "How
to operate menus and menus locations" on page 5.
EXT. INPUT
PR LIST
PR LIST
PR CH/CC
AV
1 CH 03
2 CH 05
3 CH 07
4 CH 09
5 CC 04
6 CC 05
-7 OK +7
DISPLAY