Decontamination Before Reuse; Maintenance And Cleaning - KAPPLER Zytron 300 User Information

User Information for Zytron
26

Decontamination before Reuse

This garment is designed for multiple use, single exposure. It is priced to
make disposal after use economically justified when the effectiveness
of decontamination is in question. This garment is not designed for
multiple exposures and multiple decontaminations.
It is the responsibility of the safety professional having jurisdiction over
usage of the garment to determine whether the garment has been
adequately decontaminated and can be safely re-used.
A qualified individual should develop and implement a decontamination
procedure for each of the chemicals to which the garment has been
exposed. The decontamination procedure should include complete
information on the type of contamination, as well as the level of
contamination involved.
Contaminated garments should be discarded. Contaminated garments
are not suitable for training purposes.

Maintenance and Cleaning

Only water and mild, household dishwashing liquid should be used
as decontamination liquids. No reactive or corrosive decontamination
solutions should be used with this garment.
Only garments that have been thoroughly cleaned and dried may be
considered for use. Water and mild, household dishwashing liquid
should be used to clean this garment. This garment may be scrubbed
with a soft brush or hand towel, thoroughly rinsed with clean, fresh water
and air-dried. Do not use any oxidative, corrosive or reactive decon-
tamination solutions with this garment. Do not dry-clean this garment.
Do not use hot air or a tumbling air dryer to dry this garment. Hang the
garment in a cool, dry area to ensure proper drying of the garment. A
www.kappler.com