Operation; Turning The Cooktop On; Turning The Cooktop Off; Cooking Zone Settings - Bosch NET8069UC Use And Care Manual

en-us Operation
Symbol Cooking zone
Single cooking zone
Dual cooking zone
Bridge zone
Notes
¡ The cooking zone regulates the temperature by
switching the heat on and off. The heat may also switch
on and off when on the highest power level.
– This protects components from overheating.
– The appliance is protected from electrical overload.
– Better cooking results are achieved.
¡ For cooking zones with more than one heating element,
the different sections of the cooking zone may turn on
and off at different intervals.
5 Operation

Operation

Here you will find everything you need to know about op-
Operation
erating your appliance.
5.1 Turning the cooktop on
Press ⁠ .
▶
lights up in the cooking zone displays.
a
5.2 Turning the cooktop off
Press ⁠ .
▶
a The indicator above
a The displays turn off.
a All cooking zones are turned off.
a The residual heat indicators remain lit until the cooking
zones have cooled off sufficiently.
Note: The cooktop turns off automatically when all the
cooking zones have been turned off for more than 20 sec-
onds.
5.3 Cooking zone settings
In order to make settings on a cooking zone, the cooking
zone has to be selected.
Set the desired power level for each cooking zone in the
settings area.
Setting Power level
lowest power level
highest power level
Intermediate setting for all power levels
The intermediate setting is displayed as a dot
in the cooking zone display, for example .
lights up when you set the intermediate level
between power level
Setting the power level
Requirement: The cooktop is turned on.
Press to select the cooking zone
1.
lights up in the cooking zone display.
a
a lights up under the cooking zone display.
10
turns off.
and ⁠ .
⁠ .
Function
Only one cooking zone size is available.
Two cooking zone sizes are available.
→ "Using the dual cooking zone", Page 10
The bridge zone combines two cooking zones to a long griddle zone.
→ "Using the bridge zone", Page 10
Note: Do not use cookware larger than 17" x 10" (430 x 250 mm).
Set the power level in the settings area
2.
Press to set an intermediate level.
Changing the power level
Press to select the cooking zone.
1.
Set the power level in the settings area.
2.
Turning the cooking zone off
Press to select the cooking zone.
1.
Select in the settings area.
2.
a The residual heat indicator lights up after approximately
10 seconds.
Note: You can also switch off the cooking zone directly by
touching the cooking zone symbol for longer than 3 sec-
onds.
Using the dual cooking zone
Requirement: The cooking zone is turned off.
Press to select the cooking zone.
1.
lights up in the cooking zone display.
a
Press once.
2.
lights up.
a
a Both rings of the dual cooking zone are selected.
Press again.
3.
turns off.
a
a The inner ring of the dual cooking zone remains se-
lected.
Using the bridge zone
The bridge zone joins two individual cooking zones to one
long griddle zone. This configuration is ideal for griddles
and large pans.
Requirement: One of the two cooking zones that belong
to the bridge zone is selected.
Press ⁠ .
1.
⁠ .