Neilsen CT5465 Assembly Instructions

3-IN-1 ALUMINIUM
HAND TRUCK FOLDABLE DOLLY CART
CT5465
ASSEMBLY INSTRUCTIONS
Assembly of your hand truck will be faster and easier if
1.Read instructions thoroughly before proceeding.
2.Sort connection hardware into separate piles before assembling
3.Tighten all parts by hand. Don' t use power tool.
4.Don' t over load as components could be damaged.
1. Slide down the loop handle on the top of the frame, tighten with
bolts and nuts.
2. Put nose plate on the floor, and then slide the bottom and of the nose
plate at the same time, attach the two wheel brackets to the exterior
on the bottom end of the frame on both sides. Align holes on the
wheel brackets, frame and nose plate, then insert bolts through holes
on both sides and fasten with lock nuts.
NOTE:Don't tighten lock-nuts at the moment until you completed step3.
3. Insert axle through holes of the wheel brackets, slide a washer and
then lie through one and end. of the axle, add another washer, then
secure with cotter pin. Repeat sequence for the other side.
4. Tighten all lock-nuts in Step 2.
HAND TRUCK IS NOW READY TO USE