Security - LG S-Fone SD126 User Manual

2. Security

Prevents unauthorized use of your phone.
N N o o t t e e
The Lock Code/password on your phone is
0000
by default.
2.1 PIN Code Req.
Sets the phone to disable the use of it if incorrect
password is entered for 3 times.
1. Press Soft Key 1 Menu,
2. Enter the four-digit Lock Code.
3. Press PIN Code Req..
4. Select Enable/Disable by using
.
5. After selecting Enable, enter 4 digits PIN number
and press .
2.2 New PIN Code
Change PIN Code is a function that enables changing
of the PIN number, which is saved in the card. Initially,
old PIN is confirmed when this function is selected
and, if correct PIN is entered, then followed by
entering new password for 2 times. If the new
, .
, then press
password entered for 2 times do not match each
other, a message notifies so and new password shall
be entered again. Initial PIN number differs depending
on the card manufacturer.
1. Press Soft Key 1 Menu,
2. Enter the four-digit Lock Code.
3. Press New PIN Code.
2.3 Lock Phone
Keeps your phone from unauthorized use. Once the
phone is locked, it is in restricted mode, until the Lock
Code is entered. This will allow you to receive phone
calls and still make emergency calls. If you need to
modify the Lock Code, you may modify it using the
new Lock Code within the security set menu.
1. Press Soft Key 1 Menu,
2. Enter the four-digit Lock Code.
3. Press Lock Phone.
4. Select Enable/Disable by using
.
, .
, .
, then press
43
SD126