Turning On/Off The Backlight; Programming The Thermostat To Display Temperature In Fahrenheit Or Celsius - Carrier 33CS400-01 Owner's Manual

Turning On/Off the Backlight

Turning On/Off the Backlight
Press the MODE button. While holding
MODE
the MODE, press the HUMIDITY button
to enter Setup screens.
HUMIDITY
Press the MODE button repeatedly
MODE
until this setup screen appears.
Select backlight operation:
ON - Light continuously.
OFF - Light for 8 seconds
after a button press.
Programming the Thermostat to Display Programming the Thermostat to Display
Temperature in Fahrenheit or Celsius Temperature in Fahrenheit or Celsius
C
Select thermostat
operation in degrees
Fahrenheit or Celsius.
F
Press the HUMIDITY button to leave the Setup screens. If no buttons are
pressed, the display will leave the setup screens after 30 seconds.
Note: Press the
button momentarily
to move through the
setup screens. Press
and hold the
button to move back-
wards through the
setup screens.
3
Setup
ON
4
f Setup
Page 7.2
MODE
MODE
7
Press
MODE
Press
HUMIDITY