Table of Contents
Advertisement
Anti-lock braking system (ABS)
When the ABS is deactivated
– as indicated by ABS warning
light 1 flashing – none of the
safety reserves normally
offered by the anti-lock brak-
ing system are available until
the ABS function is reacti-
vated.
There is a risk of dropping the
motorcycle if the brakes are
applied too hard and the
wheels lock or the rear wheel
lifts clear of the ground as a
result of a high level of front
tire adhesion.
After you press the starter
button, check whether the
ABS is still deactivated.
2
• With the motorcycle at a
standstill and the engine run-
ning, press ABS button 2 and
hold it down for 3 seconds
– Warning light 1 starts flashing
• Release ABS button 2
– The ABS function is deacti-
vated
– Warning light 1 continues
flashing, but at a slower rate,
to remind you that ABS has
been deactivated
OE
Optional equipment
OE
3
69
Hide quick links:
Advertisement
Table of Contents
