Table of Contents
Advertisement
< Method 2 >
Note: When servicing, do not touch white resin part
as shown below.
1. Remove the Top Cover, the Front Assembly and
the DVD Mechanism & DVD/HDD Main CBA
Assembly. Then, remove the DVD Mechanism
Unit.
2. Remove two screws, and remove the Insulating
Plate.
Insulating Plate
3. Release two Locking Tabs, and lift up one side of
the Clamper Assembly.
Clamper Assembly
Screw
Do not touch!
Locking Tabs
1-7-6
4. Release the other side of two Locking Tabs, and
remove the Clamper Assembly.
Clamper Assembly
Locking Tabs
5. Remove the disc.
Disc
6. Assemble the DVD Mechanism and DVD/HDD
Main CBA.
Note: The combination of the DVD Mechanism
and the DVD/HDD Main CBA cannot be changed.
When assembling the DVD/HDD Main CBA on the
DVD Mechanism, use the DVD/HDD Main CBA
that disassembled on the item 1. The other DVD/
HDD Main CBA cannot be used.
E4340DC
Advertisement
Table of Contents
