Safety Instructions - Master 26-20 GIR Manual

We would like to thank you for choosing this product. It is our duty to inform you that this scooter in its basic
version is intended for mild terrain and non-car traffic roads. It is possible you'll need more safety features,
such as reflectors, required under the law of the country in which the scooter will be used. It is also vital for the
rider themselves to use safety features (see safety features section).
A very important aspect in regards to the product's safety is the proper adjustment of the scooter (wheel
bearings, break adjustment, bolt tightening and proper tire inflation). That is why we highly recommend having
the scooter assembled and regularly inspected by a professional service, where skilled and knowledgeable
technicians can assist you. If you maintain such professionally set-up scooter regularly, you'll be able to enjoy
this product for a long time to come.
Model
Wheel diameter
Weight limit
Certification

SAFETY INSTRUCTIONS


Read the manual carefully before assembly.

Check if all the screws and nuts are tightened before every ride.
 For your safety, always use a helmet, knee, elbow and wrist protectors and solid shoes. Do not ride
the scooter without shoes.

Do not use the scooter on wet surfaces, sand, leaves, etc.

The basic version of the scooter is not suited for roads with car traffic or for riding in the dark.

Regularly check the screw connections, tightening mechanisms, brakes and the setting of the steering
mechanism to avoid an eventual accident while riding.

We do not recommend to modify this scooter in any way.

Do not brake rapidly and suddenly – you could fall down.

The manufacturer is not responsible for any damage that may occur while using this product.

This scooter is for one person only.

Do not try to modify the scooter by yourselves.

WARNING: Mechanisms for decreasing speed (brake lining, rims, tires, rear and foot brakes) can
become heated during use. Therefore, you should not touch them after braking.

USE AVAILABLE PROTECTIVE EQUIPMENT WHILE RIDING THIS SCOOTER (HEMLET, GLOVES. ETC.)
ASSEMBLY INSTRUCTIONS
16. Check that all the following parts are part of the package:
1 pc main frame including front fork
1 – 2 pcs brake system (based on the model)
2 pcs inflatable wheels (based on the model: 2 x 12 , 1 x 16 and 1 x 12 , or 1 x 20 and 1 x 16 )
1 pc handlebars including the handlebar rod
MAS-S029 MAS-S017
26/20" 16/12
120kg 100 kg
EN14619 EN 14619
16
MAS-S019
20/16
120 kg
EN 14619
EN