Step3: Dismantling Loader, First, disconnect the 3 connectors
aiming in the figure, and then remove the 2 screws at both
sides of the loader, (Figure 4)
CON 4
Figure 5
All manuals and user guides at all-guides.com
2-2
Figure4
CON 5
GND cable
Mechanical and Dismantling Instructions
Step4: Dismantling Front Panel: disconnect the 2 connectors
aiming in the figure then Release the snaps on the both sides
of Front Panel and gently pull the Panel out from the set.
(Figure5& 6)
CON 1
CON 2
CON 3
Snap1
Snap2
Figure 6