Advertisement
SONOS USER GUIDE
If you purchased a Boost to extend the range of your Sonos system, place the Boost in between the Sonos
speaker that's out of reach and the rest of the Sonos system.
Wall mounting
Choose a location that's close to an electrical outlet (power cord length is 6 ft. / 1.8m), away from heat
1.
sources, hidden wiring, gas lines, etc.
Drive an American standard #6 round head screw (metric, M3.5 round head screw) into the wall, leaving a
2.
gap between the wall and the screw head (approximately 0.13 in / 3.3mm).
Note: Pan head screws will also work.
Place the Boost on the wall and slide straight down, allowing the screw head to slip behind the smaller
3.
end of the keyhole slot on the back of the Boost.
Specifications
Feature
Ethernet Connection
Network Bridging
Wireless Connectivity
Power Supply
Dimensions (H x W x D)
Weight
Recommended Mounting Screw
Operating Temperature
Finish
Package Contents
* Specifications subject to change without notice.
2-port switch, 10/100 Mbps, auto MDI/MDIX
2-port switch allows a connection to your network or to other Sonos
speakers. Extend the range of SonosNet—use a Boost to extend the
SonosNet signal to areas that cannot reach the rest of the Sonos system.
Works on SonosNet™, a secure AES encrypted, peer-to-peer wireless
mesh network dedicated exclusively for Sonos to reduce WiFi interference
Auto-switching 100 - 240 V ~ 50-60 Hz 0.3 A AC universal input.
Output: 5.0 V, 2.0 A, 10.0 W
Average active efficiency: 79.1%
No-load power consumption: 0.03 W
1.3 x 4.5 x 4.5 in. (33 x 115 x 115 mm)
0.42 lb (.191 kg)
American standard #6 round head screw; Metric M3.5 round head screw
32°F to 104°F (0°C to 40°C)
White/high quality polycarbonate material
Sonos Boost, power cord, Ethernet cable, and Quickstart Guide.
Description
Advertisement
