Table of Contents
Advertisement
Features Defined
1 iPod Docking Station Connect your iPod, iPod mini, or iPod nano.
2 VOLUME Press the up arrow to increase the volume, and the down arrow to decrease volume.
3 POWER Press the POWER button to turn the radio off or on.
4 BAND Press the BAND button to switch between AM or FM radio stations.
5 FUNCTION Press the FUNCTION button to switch between radio and line-in control.
6 EQ Press the EQ button to switch equalizer modes between Classical, Jazz, Rock, and Pop.
7 AC Cord (120V / 60 Hz) The attached AC (Alternating Current) Cord provides power to the player.
8 Battery Back-Up (2 - AAA Batteries) The Battery Back-Up will save the clock and alarm settings in
case of a power outage. The display will not be active without AC Power. (batteries not included)
9 FM Antenna The FM Wire Antenna provides flexibility and range when adjusting the FM reception.
An AM Antenna is built into the player.
10 Prev/Search Press the Prev/Search button to decrease the radio frequency, or to decrease the clock time
when adjusting the clock.
11 IPOD Press the IPOD button to power on an iPod and enable control through the player.
12 Next/Search Press the Next/Search button to increase the radio frequency, or to increase the clock time
when adjusting the clock.
13 PLAY/PAUSE/M-UP Press the PLAY/PAUSE/M-UP button to play or pause an iPod, or to cycle up
through the preset radio stations.
14 DISPLAY In radio mode press the display button to switch between viewing the time or the radio
frequency.
15 ALM 2 Use the ALM 2 button to view and adjust the alarm 2 time, and to set alarm 2 to buzzer, radio,
or iPod.
16 ALM 1 Use the ALM 1 button to view and adjust the alarm 1 time, and to set alarm 1 to buzzer, radio,
or iPod.
17 MEM/CLK SET Press the MEM/CLK SET button to program a radio station into the presets, or to
adjust the clock.
18 SNOOZE / Sleep Press the SNOOZE button to delay the alarm for five minutes after the alarm sounds.
Press the Sleep button to set the player to turn off after 10 - 90 minutes.
19 LCD Display View the Time, AM Indicator, iPod Indicator, and Radio Frequency through this Liquid
Crystal Display.
20 Video Out Plug the yellow connector of an AV Cord in the Video Output to send a video signal from a
Video iPod to a source (TV) with a Video Input.
21 AUX-Out Use the Line-Out jack to connect the player to external speakers.
22 Line-In Use the line-in jack to connect an iPod shuffle or other audio device to the player.
23 DIMMER Toggle the DIMMER switch between HI and LO to adjust the brightness of the LCD Dis-
play.
4
Advertisement
Table of Contents
