Power Supply And Connecting Cable Connection; Áëå‹ ง ¨‹ Ò ยÄ¿Áåะ¡Òãเªื ่ อ Áต‹ อ Êòยเª่ ื อ Áต‹ อ - Toshiba RAS-10 Installation Manual

Power Supply and Connecting Cable Connection

Power Supply Input at Outdoor Unit Terminal Block
Indoor Unit Outdoor Unit
Connecting cable
Connecting cable connect to
Terminal block
Terminal block (1 2 3)
Connecting cable
Power cord
Earth line
Earth line
Earth line
Connecting cable
Power cord
Connecting cable
Stripping length of the connecting cable
Earth line
CAUTION
1. The power supply must be same as the rated of air conditioner.
2. Prepare the power source for exclusive use with air conditioner.
3. Circuit breaker must be used for the power supply line of this air conditioner.
4. Be sure to comply power supply and connecting cable for size and wiring method.
5. Every wire must be connected firmly.
6. Perform wiring works so as to allow a general wiring capacity.
7. Wrong wiring connection may cause some electrical part burn out.
8. Incorrect or incomplete wiring is carried out, it will cause an ignition or smoke.
9. This product can be connected to main power supply.
Connection to fixed wiring : A switch which disconnects all poles and has a contact separation at least 3 mm must be incorporated in the fixed wiring.
12