Installing The M.2 2280 Pcie Solid-State Drive (Slot-1) - Dell Precision 3260 Compact Service Manual

Installing the M.2 2280 PCIe solid-state drive (slot-1)

Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following image(s) indicate the location of the solid-state drive and provides a visual representation of the installation
procedure.
Steps
1. Align the notch on the 2280 solid-state drive with the tab on the M.2 card slot on the system board.
2. Slide the 2280 solid-state drive into the M.2 card slot on the system board.
3. Replace the screw (M2x3.5) that secures the 2280 solid-state drive to the system board.
4. Place the computer in an upright position.
Next steps
1. Install the hard-drive assembly.
2. Install the riser card—optional.
3. Install the processor fan.
4. Install the side cover.
5. Follow the procedure in after working inside your computer.
Removing and installing components 37