Renault TRIBER 2021 Vehicle User Manual page 74

AUTOMATED MANUAL TRANSMISSION (2/4)
Operation
Switch on the ignition.
The display on the instrument panel
switches on.
If neutral (N) is displayed, start the
engine but do not press the accel-
erator.
If any gear other than neutral is en-
gaged, N flashes on the display; press
the brake pedal and place the lever in
position N. Start the engine.
NB:Do not attempt to start the engine
by pushing the vehicle if the battery is
flat (the display remains OFF when the
ignition is switched ON).
Under certain conditions, the engine
starter may take some time. Keep the
key in the starting position.
Exactly like a vehicle
equipped with a manual
gearbox, a vehicle equipped
with a sequential gearbox is
unable to prevent the vehicle from
rolling on a slope if the handbrake is
not applied or the brake pedal con-
stantly not pressed. The vehicle can
be in stationary place on an incline
for 2 seconds (Giving Driver enough
time to take his foot off the brake &
press the accelerator)
2.16
ENG_NU_1321-2_XBC_Renault_2
Jaune Noir Noir texte
Starting
Moving forwards (starting in neutral)
The gear display shows Neutral
With the brake pedal pressed, posi-
tion the selector lever to D.The letter A
(Automatic) appears on the cluster.
Release the brake pedal:
– The engine's idle speed is suffi-
cient for parking manoeuvres.
– Accelerate gently to move for-
wards.
boîte de vitesses robotisée (XBC - Renault)
Reverse gear (from neutral, with the
vehicle stationary)
With the brake pedal pressed, posi-
tion the selector lever to R. The letter R
appears on the display.
Release the brake pedal:
– The engine's idle speed is suffi-
cient for parking manoeuvres.
– Accelerate gently to reverse.
There is a beep when reverse gear is
engaged.
You may shift from reverse gear to a
forwards gear by pushing the lever to D
once the vehicle is stationary.
Note: When the vehicle is stationary,
you must depress the brake pedal to
engage a gear. Otherwise, warning
Ó
light will come on.
ENG_UD68127_2