Table of Contents
Advertisement
3. Disassembly and Reassembly
This section of the service manual describes the disassembly and reassembly procedures for the LED TV.
1.
Disconnect the LED TV from the power source before disassembly.
2.
Follow these directions carefully.
Use the Samsung Service tool to disassemble the cabinet.
-
•
CAUTION
Recommended Torque for Cabinet/Stand screws : 22.0 ~ 26.5lbf
-
•
3-1. Disassembly and Reassembly
Description & Screws
1
Carefully position the TV so that the screen is
facing downwards. Make sure to place the TV
upon a soft cushion or any material that will
prevent damage to the screen.
•
Place TV face down on the Protective Cushion.
Recommend to use the Samsung Service tool.
A strength of Torque can be changed depending on the situation.
Required Jigs & Tools
•
Open Jig Tool
•
Protective Cushion
3. Disassembly and Reassemble
BN81-12884A
BN81- 10739A
Picture Description
3-1
Advertisement
Table of Contents
