Front Brake Fluid Level - Honda Motorcycle Owner's Manual

BRAKES
Both front and rear brakes are hydraulic disc
types.
As the brake pads wear, the brake fluid level
will drop. A leak in the system will also cause
the level to drop. Therefore, the brake fluid
level and pad wear must be inspected
periodically. The system must be inspected
frequently to ensure there are no fluid leaks. If
the control lever or pedal free travel becomes
excessive and the brake pads are not worn
beyond the recommended limit (page 91)
there is probably air in the brake system and it
must be bled. See your authorized Honda
dealer for this service.

Front Brake Fluid Level:

With the motorcycle in an upright position,
check the fluid level. It should be above the
LOWER level mark (1). If the level is at or
below the LOWER level mark(1), check the
brake pads for wear(page 91).
23
Worn pads should be replaced. If the pads are
not worn, have your brake system inspected for
leaks.
The recommended brake fluid is Honda DOT 4
brake fluid from a sealed container, or an
equivalent.