Intended Use; Inserting/Changing The Batteries - Bosch LR40G Operating/Safety Instructions Manual

The laser receiver is intended to quickly find rotating laser beams of the wavelength specified in the
technical data.
The laser receiver is also intended for controlling the GRL4000-90CHVG via Bluetooth
The laser receiver is suitable for indoor and outdoor use.

Inserting/Changing the Batteries

Alkali-manganese batteries are recommended
for the laser receiver.
Turn the locking mechanism (14) of the bat-
tery compartment cover into position
using a coin). Open the battery compartment
cover (13) and insert the batteries.
When inserting the batteries, ensure that the
polarity is correct according to the illustration
on the inside of the battery compartment.
Close the battery compartment cover (13)
and turn the locking mechanism (14) of the
battery compartment cover into position
The battery indicator (i) shows the state of
charge of the batteries of the laser receiver:
Always replace all the batteries at the same
time. Only use batteries from the same manu-
facturer and which have the same capacity.

Intended Use

Assembly
u Take the batteries out of the laser receiver
when you are not using it for a prolonged
period of time. The batteries can corrode
and self-discharge during prolonged stor-
age in the laser receiver.
(e.g.
Battery charge indicator for
rotary laser
The battery charge indicator (a) shows the
state of charge of the battery pack/batteries
of the rotary laser, provided that the rotary
laser is switched on and a Bluetooth® connec-
tion has been established between the laser
receiver and the rotary laser.
.
-9-
®
.