Table of Contents
Advertisement
Command Description
Calibration Menu
Read R0 calibration
parameter
Set R0 calibration
parameter to n
Read ALPHA calibration
parameter
Set ALPHA calibration
parameter to n
Read DELTA calibration
parameter
Read DELTA calibration
parameter
Read C0 calibration
parameter
Set C0 calibration
parameter
Read CG calibration
parameter
Set CG calibration
parameter
Functions not on menu
Read firmware version
number
Read structure of all
commands
Read all operating
parameters
Legend:
Note:
Calibrate a Single Probe
Insert the probe to be calibrated into the well of the bath. For best results insert the probe to the full
depth of the well. Once you insert the probe into the well, allow adequate stabilization time so the test
probe temperature settles as described above. Once the probe has settled to the temperature of the
well, compare that temperature to the displayed calibrator temperature. The display temperature
should be stable to within 0.1 °C (32.18 °F) for best results.
Never introduce any foreign material into the well.
Table 5. Controller Communications Command (cont.)
Command Format
r[0]
r[0]=n
al[pha]
al[pha]=n
de[lta]
de[lta]=n
*c[0]
*c[0]=n
*cg
*cg=n
*ver[sion]
h[elp]
all
[] Optional Command data
{} Returns either information
n Numeric data supplied by user
9 Numeric data returned to user
x Character data returned to user
When DUPLEX is set to FULL and a command is sent to READ, the command is returned followed
by a carriage return and linefeed. Then the value is returned as indicated in the RETURNED
column.
Command
Returned
Example
r
r0: 999.999
r=100.324
-
al
al: 9.9999999
al=0.0038433
-
de
de:9.99999
de=1.3742
-
*c
c0:99.9999
*c=-5.113
-
*cg
cg:99.999
*cg=-4.115
*ver
ver.9999,9.99
h
list of commands
all
list of parameters
W Caution
Micro-Bath
Calibrate a Single Probe
Returned
Acceptable
Example
Values
r0: 100.578
-
-
90 to 110
al: 0.0038573
-
-
.002 to 005
de: 1.507
-
-
0–3.0
c0:-0.297
-
-
-
cg:-0.555
-
-
-
ver.7102,2.00
-
-
-
-
-
33
Advertisement
Table of Contents
