Replacing The Top Cover - Asus PE100A User Manual

3.4

Replacing the top cover

1. Place the top cover into the Embedded Computer chassis and ensure
the ASUS IoT logo is on the left side of the top cover when you are
facing the front of the Embedded Computer.
IMPORTANT! Ensure that the RF cables and/or other cables are not
under or in the way of the top cover when installing it, as this may
cause the antennas to not work properly.
2. Secure the top cover from the bottom of the Embedded Computer
using the four (4) rubber feet screws removed previously.
PE100A 39