Hitachi 42HDF52 Operating Manual page 29

HOW TO USE THE REMOTE
TO CONTROL YOUR PLASMA TV
26. P. MODE button
Press to select standard, movie and dynamic picture mode. Press repeatedly to circle through the selections.
27. ZOOM +/- buttons
Zoom in on the image by pressing Zoom + button and press Zoom – button to zoom out.
28. MTS button (for DTV: Multi Language mode)
Press MTS button to select Mono, Stereo, and SAP (Second Audio Program) under TV mode.
29. PIP SWAP button
Press to exchange the main video signal source with PIP video signal source.
30. PIP INPUT button
Activate PIP by pressing PIP Input button to select desired video input. To turn off PIP by keep pressing PIP Input button until the PIP
window disappear. PIP source cannot be the same with main video source. (PC & Component are not accessible to PIP)
Main
Sub
NTSC
DTV
Composite & S-Video
Component(480i)
DVI
Analog RGB
NOTES - For changing TV channel under PIP function
1. One TV source (NTSC or DTV) in main picture or sub picture:
Press directly channel+/-, number and return buttons on remote control to change the channel.
2. NTSC and DTV sources in main picture and sub picture:
Press recall button to display the audio source info. After select the audio source to the mode you want to change, press
channel+/-, number and return buttons on remote control to change the channel.
31. SLEEP button
Press the sleep button repeatedly to set the sleep timer to 30, 60, 90, and 120 minutes.
Composite &
NTSC DTV
× ×
× ×
× ×
Component
S-Video (480i)
×
× ×
× ×
27
DVI Analog RGB
× ×
×
×