Power Management; Post Behavior - Dell Latitude 7200 2-in-1 Setup And Specifications Manual

Power management

Table 32. Power Management
Option
Lid Switch
AC Behavior
Enable Intel Speed Shift
technology
Auto On Time
USB Wake Support
Advanced Battery
Charge Configuration
Primary Battery Charge
Configuration
Type-C Connector
Power

Post behavior

Table 33. POST Behavior
Option
Adapter Warnings
30 System setup
Description
Allows you to disable the lid switch.
The options are:
● Enable Lid Switch—enabled by default
● Power On Lid Open—enabled by default
Allows you to enable or disable the computer from turning on automatically when an AC adapter
is connected.
● Wake on AC
By default, this option is disabled.
Allows you to enable or disable the Intel Speed Shift Technology option. By default, this option is
enabled.
Allows you to set the time at which the computer must turn on automatically.
The options are:
● Disabled—enabled by default
● Every Day
● Weekdays
● Select Days
Allows you to enable USB devices to wake the system from standby. By default, the option
Enable USB Wake Support is disabled.
This option enables you to maximize the battery health. When you enable this option, your system
uses the standard charging algorithm and other techniques, during the nonwork hours to improve
the battery health. By default, the Enable Advanced Battery Charge Mode option is disabled.
Allows you to select the charging mode for the battery.
The options are:
● Adaptive—enabled by default
● Standard
● ExpressCharge
● Primarily AC use
● Custom
If Custom Charge is selected, you can also configure Custom Charge Start and Custom Charge
Stop.
NOTE: All charging mode may not be available for all the batteries.
Allows you to set the maximum power that can be drawn from the type-c connector. The options
are:
● 7.5 Watts—enabled by default
● 15 Watts
Description
Allows you to enable or disable the system setup (BIOS) warning messages when you use certain
power adapters.