Auto Weight Cook Chart - Sharp R670 Operation Manual

WEIGHT RANGE:
• Food weight should be rounded up or down to the nearest 0.1 kg, for example, 0.65kg to
0.7kg or 0.34kg to 0.3kg.
• You are restricted to enter a weight within the range (see the following charts).
NOTES:
• When action is required (example, to turn food over), the oven stops, the audible signals
sound, the remaining cooking time and an indicator will flash on the display. To continue
cooking, press the START/AUTO MINUTE key.
• The final temperature will vary according to the initial food temperature. Check food is pip-
ing hot after cooking. If necessary, you can extend the cooking manually.
AUTO WEIGHT COOK
MENU WEIGHT RANGE
Roast Beef 0.1kg - 2.5kg
Roast Lamb 0.1kg - 2.5kg
Roast Pork 0.1kg - 2.5kg

AUTO WEIGHT COOK CHART

COOKING PROCEDURE
• Place meat in a flan dish on the turntable.
• Turn meat over when the audible signal sounds.
• After cooking, leave meat to stand wrapped in alumini-
um foil for 10 minutes.
• Place meat in a flan dish on the turntable.
• Turn meat over when the audible signal sounds .
• After cooking, leave meat to stand wrapped in alumini-
um foil for 10 minutes.
• Place meat in a flan dish on the turntable .
• Turn meat over when the audible signal sounds .
• After cooking, leave meat to stand wrapped in alumini-
um foil for 10 minutes.
GB-20