Peavey SRC Series Owner's Manual page 16

Hum and Noise:
Output Residue Noise
Ref: 0 dBu
Master L/R -97 dBu
-92 dBu
Submaster -97 dBu
-92 dBu
Hum and Noise Measurements: 22 Hz to 22 kHz BW
Equivalent Input Noise (EIN):
-128 dBu (Input terminated with 150 ohms)
Crosstalk:
>80 dB Adjacent Input Channels (20 Hz - 20kHz)
>74 dB Left to Right Outputs (20 Hz - 20 kHz)
Common Mode Rejection Ratio (Mic Input):
50 dB min (20 Hz to 20 kHz)
70 dB typ @ 1 kHz
Meters:
L/R Master and all Submasters = 12 segment, peak reading.
(0 dB= +4 dBu)
Signal/Overload Indicators:
Red LED lights 2 dB below clipping.
Lamp Power :
12V AC @200ma per connector, or 12V AC @400ma total maximum load. Power is available
between pins 1 and 2 and is electrically isolated from ground.
Power requirements:
DOM: 120V AC 60 Hz
EXP: 230V AC 50/60 Hz
All manuals and user guides at all-guides.com
S/N Ratio Test Conditions
Ref: Nom output level
101 dB All Faders Down
Master Fader Nominal,
96 dB
Channel Faders Down,
All Channels Assigned
101 dB All Faders Down
96 dB Master Fader Nominal,
Channel Faders Down,
All Channels Assigned
Page 16
50 watts nominal, 18 channel
55 watts nominal, 26 channel
60 watts nominal, 34 channel
50 watts nominal, 18 channel
55 watts nominal, 26 channel
60 watts nominal, 34 channel