WS-TB-1 Transmitter Box Product Diagram 1. Indicator 4.Function button 2. Safety clip 5. Power switch 3. Hanging ring 6. Reset button 7. USB Type-C port 8. 1/4-20 mount receiver The WS-TB-1 transmitter box is suitable for the fixtures with 2.4G or Bluetooth. Usage 1.
Page 3
3. Charging status display: Connect the USB Type-C cable to the USB Type-C port of the transmitter box, and then connect the power supply to charge the transmitter box. (Note: Do not charge in a high temperature environment.) ① When charging in the power-on state, the indicator will be dimmed, and you can check the current battery level by short pressing the function button.
Page 4
Warning This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.