Specifications - Panasonic NC-HKT081 Operating Instructions Manual

Table of Contents

Advertisement

Troubleshooting
Problem
The hot water has a
● Depending on the amount of chloride contained in the
strange smell.
water supply, there may be a residual chalky smell.
Shiny white or brown
● This is limescale.
substances are
Limescale is more likely to
floating in the hot
be generated when using
water.
water with a high mineral
content.
Rough milky white
• Mineral water.
substances are
• Water from ionic water
adhered to parts
purifiers.
inside the body.
The sound of water
● The sound becomes
boiling has become
louder when the
very loud.
limescale accumulate.
A clicking sound is
● This sound is made when an internal heat component
heard a short time
cools down.
after use.
This is not malfunction.
● Did you boil with the lid
open?
The machine is taking
● Limescale build up.
a long time to boil.
● If the water is very cold, the machine will take longer time
to boil.
When pouring and
● This is the sound of hammer to prevent the hot water
disassemble the lid,
flow out when accidental overturn happens. This is not a
there is a "karla"
abnormality.
sound.
EN14
Cause
and Action
● Clean the machine with a
limescale remover.
(P. EN12)
● Close the lid. (P. EN10)
● Clean the machine with a
limescale remover.
(P. EN12)

Specifications

Power supply
Power consumption
Dimensions
Body
(W × D × H)
Body + Power base
(approx.)
Body
Weight
(approx.)
Body + Power base
Rated capacity
Length of the power cord (approx.)
Overheat protection
● In certain regions (high altitude, very cold locations), it may not be possible to obtain the
predetermined performance.
NC-HKT081
220 V
50 Hz
1200 W
22.1 cm × 14.8 cm × 19.3 cm
22.1 cm × 14.8 cm × 21.1 cm
1.0 kg
1.2 kg
0.8 L
0.73 m
Temperature fuse
EN15

Advertisement

Table of Contents
loading

Table of Contents