Northern Telecom DMS-100 Series Maintenance Procedure page 17

Tape drive maintenance
Step Action
7 Carefully wipe the head in the direction that the tape travels. (Refer to
Figure1-1). Do not wipe perpendicularly or use a circular scrubbing
motion.
8 Discard the used swab and repeat steps 6 and 7 with new swabs until
the swab shows no signs of dirt.
9 Use a new, dry swab to remove any remaining cleaning fluid from the
head.
10 Push the head loading lever away from the load position. If there was a
tape cartridge in the tape drive, reinsert it.
11 Turn on the power to the tape drive.
DMS VoiceMail Routine Maintenance Procedures SPM 02
Routine maintenance procedures 1-7
Tape drive maintenance
(continued)
(continued)