Page 1
iSolo 230 English User’s Manual GZ-AA3CBI-SNS/SNB/SNG...
Page 2
Be sure to observe the instructions in the installation manual. Thank you for purchasing GIGABYTE Tech. thermal product. GIGABYTE Tech. is dedicated to the integration of casing water/air-cooling solution technology to provide users with the most optimal solution for thermal dissipation.
Table of Contents 1. Components Introduction 1-1 Casing’s Internal Structure 1-2 Front, Rear, and Left Side Panel Structure 1.3 Removal of Side and Front Panel 2. Features 3. Specifications 4. Installation Instruction 4-1 Installation of Power Supply 4-2 Installation of Motherboard 4-3 Installation of Add-on Card 4-4 Installation of Front Multi-Media I/O port 4-5 Connection of Fan Power Cables...
1.Components Introduction 1-1 Casing’s Internal Structure Accessory Box (Refer to the figures below for the attachments in the accessory box) Securing Runner x 6 Copper Stand Off Large Wire Clamp Mini Wire Clamp Front Cable Kit (Refer to the figures below for the cable connectors) USB 2.0 Audio Set (HD &...
1-2 Front, Rear, and Left Side Panel Structure a) Left Side Panel Ventilated Mesh Side Panel Kit Left Side Panel c) Rear Panel 1-3 Removal of Side and Front Panels 1-3.1 To remove side panels: 1-3.1a Remove the 4 thumb screws at the rear of the side panel, and detach the side panels.
Complete front panel multi-media support, include 2 x USB 2.0, 1 x IEEE1394, 1 x audio set (HD & AC97) Full Support of Gigabyte Tech. thermal solution LCS and Air cooling products lines Support ATX / Micro ATX / Flex ATX motherboard.
3.Specifications Model Case Type Size Front Bezel Material Color Side panel Body material Net weight 5.25” drive bay (External) 3.5 drive bay (External) 3.5 drive bay (Internal) Expansion slots Form factor System Fan (front) System Fan (rear) I / O Ports GZ-AA3CBI-SNS/SNB/SNG Middle Tower 200 x 440 x 494mm (W x H x D)
4.Installation Instruction Please follow the reference sections in order for installation 4-1 Installation of Power Supply To facilitate the installation, it is recommended to place the chassis upright on the table. Required Tools: Power supply securing screw x 4; Cross screwdriver. 4-1.1 Remove side panel (see step 1-3.1 on page 5).
Flex ATX F1-F6 4-3 Installation of Add-on Card The iSolo 230 does not require any tools for installation of add-on cards, e.g. Graphics card and network card. Required Tools: None 4-3.1 Unlock the corresponding expansion slot retention lock by pushing it downwards.
4-4 Installation of Front Multi-Media I/O port Incorrect connection of the slots can cause the motherboard to malfunction or completely destroy the motherboard. Please read the manual carefully in the installation as incorrect installations or connection causing faults will void your warranty. The front panel consists of: (1) 2 x USB 2.0, 1 x IEEE 1394 and 1 x Audio Set (HD &...
4-4.3 Insert the Audio connector into the corresponding socket on the motherboard. HD AUDIO AC'97 (2) Basic casing power switch control cable kit. Follow the connectors list below for installation (see figure below) Different motherboards have different installation areas and specifications, screw holes and connectors.
4-6 Installation of 5.25” Front Device Bay 4-6.1 Detach the front panel (see step 1-3.2 on page 5) and remove the mesh drive rail from the front panel. 4-6.2 Remove the front EMI plate and attach the front panel onto the chassis. 4-6.3 Slide the 5.25”...
4-10 Liquid Cooling System Support The iSolo 230 casing can fully support the GIGABYTE 3D Galaxy Liquid Cooling System (it also supports majority of the liquid cooling systems available commercially). While installing the liquid cooling system, please refer to the manual provided with the liquid cooling system.